Outside Rearview Mirror Glass Replacement
Courtesy of GENERAL MOTORS COMPANY Outside Rearview Mirror Glass Replacement
| Callout |
Component Name |
| 1 |
Outside Rearview Mirror Glass Retainers (Qty: 8)
WARNING:
Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.
Procedure
- Place masking tape over the mirror glass.
- Carefully push the outside rearview mirror glass upward and into the right corner of the mirror housing, allowing access to the bottom edge.
- Grasp the bottom edge of the mirror glass firmly, lift it up and pull rearward until the mirror glass retainers release the actuator motor ring.
- Disconnect the outside mirror glass electrical connectors.
|
| 2 |
Outside Rearview Mirror Glass Procedure
- Place the mirror glass in the lower motor retainers.
- Place one hand on the back of the mirror housing, using the flat palm of the other hand press inward locking the mirror glass retainers into the actuator motor ring.
- Remove the masking tape from the mirror glass.
NOTE:
Inspect the outside mirror for proper operation.
|