FixVault
Home › Chevrolet › 2014 › Impala LS › Repair and Diagnosis › Engine Performance › System › Data Communication System - Diagnostic Information And Procedures › Diagnostic Information and Procedures › DTC U0028 › Repair Verification

Repair Verification

  1. Ignition OFF, all access doors closed, all vehicle systems OFF, and all keys at least 3 m (9.8 ft) away from vehicle. It may take up to 2 min for all vehicle systems to power down.
  2. Ignition ON.
  3. Access the A11 Radio scan tool data display and verify that the Surrogate MOST Master Node Upstream Position parameter value is None.
    • If the value is not None 

      Disconnect the A11 Radio power or the battery cables for 1 min to reset this value to None.

    • If the value is None 
  4. All OK.
About FixVault