Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Lower Control Arm Front Bolt (1) | ||
|
100 N.m | 74 lb ft |
|
Plus 90 Degrees | |
| Front Lower Control Arm Rear Bolt (1) | ||
|
100 N.m | 74 lb ft |
|
Plus 90 Degrees | |
| Front Suspension Strut Mount Nut | 55 N.m | 41 lb ft |
| Front Suspension Strut Nut | 70 N.m | 52 lb ft |
| Front Wheel Bearing and Hub Bolt | ||
|
100 N.m | 74 lb ft |
|
Plus 75 Degrees | |
| Stabilizer Shaft Insulator Clamp Bolt (1) | ||
|
22 N.m | 16 lb ft |
|
Plus 30 Degrees | |
| Stabilizer Shaft Link Nut | 65 N.m | 48 lb ft |
| Steering Knuckle Nut (at Lower Control Arm) (1) | ||
|
50 N.m | 37 lb ft |
|
Loosen 120 Degrees | |
|
50 N.m | 37 lb ft |
|
Plus 45 Degrees | |
| Steering Knuckle Nut (at Steering Knuckle) (1) | ||
|
85 N.m | 63 lb ft |
|
Plus 60 degrees | |
| 1. Torque-to-yield fastener in use, requires NEW bolt. | ||