Installation Procedure
WARNING: This page is about a different car, the 2014 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Install the EBCM (1) to the HCU.
- Install the EBCM bolts (1) and tighten to 5 N.m (44 lb in).
- Install the EBTCM assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
- Program the EBCM. Refer to Control Module References .
CAUTION:
Refer to Fastener Caution .