FixVault
Home › Chevrolet › 2014 › Orlando LS, Automatic Trans › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.4L (Lea) - Repair Instructions › Repair Instructions › Throttle Body Assembly Replacement › Installation Procedure

Installation Procedure

    Fig 1: Throttle Body, Bolts & Gasket
    GM2557056Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW gasket (1).
  2. Install the throttle body (2).
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install 4 throttle body bolts (3), and tighten to 10 N.m (89 lb in).
    4. Fig 2: Throttle Body Wiring Harness Plug
    GM2557057Courtesy of GENERAL MOTORS COMPANY
  4. Install the throttle body wiring harness plug (1).
  5. Install the air cleaner outlet rear duct. Refer to Air Cleaner Outlet Rear Duct Replacement .
  6. Perform Throttle Idle/Learn. Refer to Q38 Throttle Body: Throttle/Idle Learn .
About FixVault