Circuit/System Verification
NOTE:
- DTC P2548 is an informational DTC.
- Diagnose all other engine control module DTCs prior to DTC P2548.
- Verify that no other DTCs are set except for DTC P2548.
- If any other DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If only DTC P2548 is set
- If any other DTCs are set
- Replace the K17 Electronic Brake Control Module.
- Verify the DTC does not set while operating the vehicle within the Conditions for Running the DTC.
- If DTC sets
Replace the K20 Engine Control Module.
- If DTC does not set
- If DTC sets
- All OK.