Liftgate Latch Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Liftgate Latch & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the liftgate trim finish panel. Refer to Liftgate Trim Finish Panel Replacement (Hatchback) . Remove the liftgate latch cover.
1	Liftgate Latch Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Liftgate Latch Assembly Procedure Disconnect the electrical connector. Adjust the liftgate if needed.

Callout

Component Name

Preliminary Procedures

Remove the liftgate trim finish panel. Refer to Liftgate Trim Finish Panel Replacement (Hatchback) .
Remove the liftgate latch cover.

Liftgate Latch Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Liftgate Latch Assembly

Procedure

Disconnect the electrical connector.
Adjust the liftgate if needed.