Installation Procedure
WARNING: This page is about a different car, the 2013 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Turn used adjuster bolt CCW counting turns until used pulley bottoms out. Turn new adjuster bolt CCW until new pulley bottoms out. Turn new adjuster bolt CW the same number of turns as counted on old adjuster bolt.
- Install the generator bracket (2).
- Tighten the 4 generator bracket retaining bolts to 22 (16 lb ft).
- Install the generator. Refer to Generator Replacement .
CAUTION:
Refer to Fastener Caution .