FixVault
Home › Chevrolet › 2014 › Traverse LS, 4D Utility › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Exhaust Manifold Lower Heat Shield Replacement › Installation Procedure

Installation Procedure

  1. Position the exhaust manifold lower heat shield to the engine.
    Fig 1: Identifying Exhaust Manifold Lower Heat Shield Bolts
    GM1839760Courtesy of GENERAL MOTORS COMPANY
  2. Install the exhaust manifold lower heat shield bolts (1, 2). Tighten bolt (1) to 10 N.m (89 lb in) and tighten bolt (2) to 50 N.m (37 lb ft).
    CAUTION: Refer to Fastener Caution .
  3. Lower the vehicle.
About FixVault