FixVault
Home › Chevrolet › 2014 › Trax LS, Automatic Trans › Repair and Diagnosis › Body & Frame › Windows › Fixed And MOVEABLE Window System › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

  1. Install the windshield into the opening. Refer to Adhesive Installation of Windshields .
  2. Remove the outside moisture sensor. Refer to Windshield Outside Moisture Sensor Replacement .
  3. Remove the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement (Without UFL and LDW) , Remote Control Door Lock Receiver Replacement (With UFL and LDW) .
  4. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
  5. Install the windshield garnish molding. Refer to Windshield Garnish Molding Replacement (Encore) , Windshield Garnish Molding Replacement (Trax) .
  6. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement (Trax) , Air Inlet Grille Panel Replacement (Encore) .
  7. Install the windshield wipers arms. Refer to Windshield Wiper Arm Replacement .
  8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  9. Close the hood.
About FixVault