Circuit/System Verification

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON.
Verify DTC B1015 is not set.
- If the DTC is set
1. Program the control module that set the DTC.
2. Ignition ON.
3. Verify DTC B1015 is not set.
  - If the DTC is set, replace the control module that set the DTC.
  - If the DTC is not set
4. All OK
- If the DTC is not set
All OK