FixVault
Home › Chevrolet › 2014 › Trax LS, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 53 (Object Detection System And Pedestrian Protection System) › Diagnostic Information and Procedures › DTC B1015 › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC B1015 is not.
    • If DTC B1015 is set 
    1. Program the control module the DTC originally set in.
    2. Verify the DTC does not set.
      • If the DTC is sets, replace the control module the DTC set in.
      • If the DTC does not set
    3. All OK
    • If DTC B1015 is not set 
  3. All OK
About FixVault