Installation Procedure
WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front brake shield (1).
- Install the front brake shield bolts (1) and tighten to 9 N.m (80 lb in).
- Install the front brake rotor. Refer to Front Brake Rotor Replacement .
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
CAUTION:
Refer to Fastener Caution .