FixVault

Circuit/System Verification

  1. Verify there are no immobilizer DTCs set in the K9 Body Control Module.
    • If no immobilizer DTCs are set in the K9 Body Control Module 
  2. Perform the K9 Body Control Module immobilizer learn using the Body Control Module IMMO Function with Existing Transponder or Remote Key in SPS. Refer to Immobilizer System Component Programming .
  3. Verify the K9 Body Control Module successfully completes the learn procedure and DTC P0513 is not set.
    • If the K9 Body Control Module does not successfully learn or DTC P0513 is set 

      Perform the appropriate immobilizer learn using the IMMO Learn in SPS. Refer to Immobilizer System Component Programming .

    • If the K9 Body Control Module successfully completes the learn and DTC P0513 is not set 
  4. All OK