Circuit/System Verification

Vehicle in Service Mode.
Verify that no DTCs are set.
- If any DTCs are set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no DTCs are set
Verify the instrument cluster ABS indicator turns ON and OFF when commanding the All Indicators ON and OFF with a scan tool.
- If ABS indicator does not turn ON and OFF
  Replace the P16 instrument cluster.
- If the ABS indicator turns ON and OFF
Verify the ABS indicator turns OFF 5 seconds after the ignition is turned ON.
- If the ABS indicator does not turn OFF
  Replace the K17 electronic brake control module.
- If the ABS indicator turns OFF
All OK.