FixVault
Home › Chevrolet › 2014 › Volt › Repair and Diagnosis › Electrical › Instrument Panel System Displays And Gauges › Diagnostic Information and Procedures › DTC B124F: MOST Programming Failure › Circuit/System Verification

Circuit/System Verification

  1. Vehicle in Service Mode.
  2. Verify DTC B124F is not set.
    • If the DTC is set 
    1. Program the P16 Instrument Cluster.
    2. Verify the DTC is not set.
      • If the DTC is set, replace P16 Instrument Cluster.
      • If the DTC is not set
    3. All OK.
    • If the DTC is not set 
  3. All OK
About FixVault