FixVault
Home › Chevrolet › 2015 › Captiva Sport LS › Repair and Diagnosis › General Information › Reset Procedures › Programming And Setup - All Systems › Repair Instructions › Body Control Module Programming and Setup › Programming the BCM

Programming the BCM

NOTE:

After the procedure is completed, the personalization settings of the BCM are set to default settings. Inform the customer that the personalization must be set again.

NOTE:

The vehicle will not start and many other functions may not operate properly if a replacement BCM is not properly set up. The following procedures must be followed:

  1. Programming the BCM. Refer to Service Programming System (SPS) .
  2. Brake Pedal Position Sensor Calibration. Refer to Brake Pedal Position Sensor Calibration .
  3. Learning the Restraints ID.
About FixVault