FixVault
Home › Chevrolet › 2015 › Captiva Sport LS › Repair and Diagnosis › General Information › Reset Procedures › Programming And Setup - All Systems › Repair Instructions › Instrument Cluster Programming and Setup

Instrument Cluster Programming and Setup

When replacing the Instrument Panel Cluster (IPC), the replacement IPC must be calibrated and the odometer information transferred to the new unit.

NOTE:

it is important to use the following procedures in the sequence listed.

  1. Calibrate the IPC using the Service Programming System (SPS) .
  2. Transfer the odometer information to the replacement IPC using IPC SETUP in the Service Programming System (SPS) .
About FixVault