Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
- Loosen the jam nut on the tie rod (1).
- Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .
- Tighten the jam nut on the tie rod. Tighten the front tie rod jam nut to 75 N.m (55 lb ft).
- Check the toe setting after tightening.
- Adjust the toe setting if necessary.
- Steering Angle Sensor Centering
CAUTION:
Refer to Fastener Caution .