FixVault
Home › Chevrolet › 2015 › Cruze Diesel › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Wiring Systems And Power Management - Repair Instructions › Repair Instructions › Front Compartment Fuse Block Replacement › Installation Procedure

Installation Procedure

  1. Install front compartment fuse block wiring harness supply (1) and tighten to 12 N.m (106 lb in).
    Fig 1: Wiring Harness Supply, Front Compartment Fuse Block And Electrical Connectors
    GM2191907Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  2. Push down the 3 electrical connectors (3) before installation of the front compartment fuse block (2).
  3. Install 3 front compartment fuse block bolts (1) and tighten to 6 N.m (53 lb in).
    Fig 2: Identifying Front Compartment Fuse Block Bolt
    GM2191908Courtesy of GENERAL MOTORS COMPANY
  4. Install the front compartment fuse block cover. Refer to Front Compartment Fuse Block Cover Replacement .
  5. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
About FixVault