Installation Procedure

Install fuse block.
Install body wiring harness and 2 body wiring harness nuts and tighten to 4.7 N.m (42 lb in).
CAUTION: Refer to Fastener Caution
Install the positive battery cable. Refer to Battery Positive Cable Replacement .
Install the positive battery cable to starter (3).

Fig 1: Fuse Box Cover, Battery Cable And Nut
Courtesy of GENERAL MOTORS COMPANY
Install the positive battery cable to starter nut (2) and tighten to 9 N.m (80 lb in).
Close the battery fuse box cover and lock the retaining tabs (1) and (4).

Fig 2: Battery Fuse Box Cover
Courtesy of GENERAL MOTORS COMPANY
Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .