FixVault
Home › Chevrolet › 2015 › Cruze LT, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.4L (LUJ, LUV) - Repair Instructions › Repair Instructions › Camshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

  1. Open hood.
  2. Disconnect the camshaft position sensor wiring harness plug (1).
    Fig 1: Camshaft Position Sensor Wiring Harness Plug
    GM2191800Courtesy of GENERAL MOTORS COMPANY
    NOTE: Graphic shows exhaust camshaft position sensor. Use same procedure for Intake camshaft position sensor.
  3. Remove the camshaft position sensor bolt (3).
    Fig 2: Camshaft Position Sensor
    GM2191799Courtesy of GENERAL MOTORS COMPANY
    NOTE: Graphic shows exhaust camshaft position sensor. Use same procedure for Intake camshaft position sensor.
  4. Remove the camshaft position sensor (2) and the seal ring (1).
About FixVault