Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Refer to Brake Fluid Irritant Warning .

CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

Remove the electronic brake and traction control module (EBTCM) assembly. Refer to Electronic Brake and Traction Control Module with Brake Pressure Modulator Valve Replacement .
Remove the electronic brake control module (EBCM) bolts (1).

Fig 1: EBCM Bolts
Courtesy of GENERAL MOTORS COMPANY
Carefully separate the EBCM (1) from the hydraulic control unit (HCU).

Fig 2: EBCM
Courtesy of GENERAL MOTORS COMPANY

NOTE: Do not pry the components apart.
Clean the sealing surfaces of the EBCM and the HCU with denatured alcohol and allow to dry.