FixVault
Home › Chevrolet › 2015 › SS Automatic Trans › Repair and Diagnosis › Body & Frame › Sun Roof/T-Top/Convertible Top › Sunroof System › Repair Instructions › Sunroof Panel/Window Weatherstrip Replacement › Installation Procedure

Installation Procedure

  1. Using a clean dampened cloth wipe the seal with a small amount of the same window cleaner in order to ease installation.
    2. Fig 1: Installing Sunroof Window Seal Using Small Rubber Hammer
    GM548088Courtesy of GENERAL MOTORS COMPANY
  2. Position the sunroof window panel seal onto the window frame, locating the starting end of the seal at the relief notch in the center of the passenger side of the frame.
    3. IMPORTANT:

    Ensure that the seal is properly seated around the entire perimeter of the window frame.

  3. Firmly press the window seal into place. A small rubber hammer will help in the installation.
    4. Fig 2: Sunroof Window
    GM791501Courtesy of GENERAL MOTORS COMPANY
  4. Install the sunroof window panel. Refer to Sunroof Window Replacement .
  5. Adjust the window panel height. Refer to Sunroof Window Height and Opening Fit Adjustment .
About FixVault