FixVault
Home › Chevrolet › 2015 › Sonic RS, 4D Hatchback, Automatic Trans › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Repair Instructions › Electronic Brake Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: Refer to Brake Fluid Irritant Warning .
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
  1. Remove the battery tray. Refer to Battery Tray Replacement .
  2. Disconnect the electronic brake control module (EBCM) electrical connector.
  3. Remove the EBCM bolts (1).
    Fig 1: Electronic Brake Control Module Bolts
    GM2535377Courtesy of GENERAL MOTORS COMPANY
  4. Carefully separate the EBCM (1) from the BPMV.
    Fig 2: Electronic Brake Control Module
    GM2535378Courtesy of GENERAL MOTORS COMPANY
    NOTE: Do not pry the components apart.
  5. Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
About FixVault