Installation Procedure

Install the battery positive cable (2) to the battery positive cable junction block and tighten nut (1) to 7 N.m (62 lb in).

Fig 1: Battery Positive Cable & Nut
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Install the battery positive cable (2) to the underhood fuse block and tighten nut (1) to 7 N.m (62 lb in).

Fig 2: Battery Positive Cable & Nut
Courtesy of GENERAL MOTORS COMPANY
Install the underhood fuse block cover.
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .