Installation Procedure

Install the generator (2) with the mounting fasteners (1) and tighten to 35 N.m (26 lb ft).

Fig 1: Generator & Mounting Fasteners
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Install the battery positive cable (3) and the engine harness connector (1) to the back of the generator. Tighten fastener (2) to 9 N.m (80 lb in).

Fig 2: Engine Harness Connector, Positive Battery Cable & Generator Fastener
Courtesy of GENERAL MOTORS COMPANY
Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
Install the drive belt. Refer to Drive Belt Replacement .
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .