Circuit/System Verification
- Vehicle in Service Mode.
- Verify the instrument cluster traction/stability control indicator turns On and Off when commanding the Instrument Cluster All Indicators On and Off with a scan tool.
- If the indicator does not turn On and Off
Replace the P16 Instrument Cluster.
- If the indicator turns On and Off
- If the indicator does not turn On and Off
- Verify the scan tool Body Control Module Traction Control Switch parameter changes between Active and Inactive while pressing and releasing the traction control switch.
- If the parameter does not change
Refer to Circuit/System Testing.
- If the parameter changes
- If the parameter does not change
- All OK.