FixVault
Home › Chevrolet › 2015 › Spark EV › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Repair Instructions › Electronic Brake Control Module Replacement › Installation Procedure

Installation Procedure

  1. Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
  2. Install the EBCM (1) to the BPMV.
    Fig 1: EBCM And BPMV
    GM3226887Courtesy of GENERAL MOTORS COMPANY
  3. Install the EBCM bolts (1) and tighten to 3 N.m (27 lb in).
    Fig 2: Electronic Brake Control Module (EBCM) Bolts
    GM3226886Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  4. Install the BPMV assembly. Refer to Brake Pressure Modulator Valve Replacement .
  5. Program the EBCM. Refer to Electronic Brake Control Module Programming and Setup .
About FixVault