FixVault
Home › Chevrolet › 2015 › Spark LS, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.2L - Repair Instructions › Repair Instructions › Fuel Tank Filler Pipe Replacement (LFM) › Installation Procedure

Installation Procedure

  1. Install the fuel tank filler pipe assembly (4).
    Fig 1: Fuel Tank Filler Hose And Clamp
    GM3416008Courtesy of GENERAL MOTORS COMPANY
  2. Install the fuel tank filler pipe lower bolt (1) and tighten to 3 N.m (27 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Connect the fuel tank filler hose (3) and clamp.
  4. Connect the fuel tank vent pipe (2) and clamp.
  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
  6. Install the fuel filler pipe upper bolts (1) and tighten to 6 N.m (53 lb in).
    Fig 2: Fuel Tank Filler Pipe
    GM2810103Courtesy of GENERAL MOTORS COMPANY
  7. Close the fuel filler cap and filler door.
About FixVault