FixVault
Home › Chevrolet › 2015 › Tahoe SSV › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Front Wheel Speed Sensor Replacement (Without 9C1) › Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (6-Lug Wheel) .
  3. Remove the front brake rotor. Refer to Front Brake Rotor Replacement .
  4. Disconnect the front wheel speed sensor electrical connector.
    5. Fig 1: Front Wheel Speed Sensor Harness Electrical Connector
    GM3256100Courtesy of GENERAL MOTORS COMPANY
  5. Release the front wheel speed sensor harness electrical connector (1) from the brake hose bracket.
  6. Release the front wheel speed sensor harness retainers (2).
    7. Fig 2: Front Wheel Speed Sensor Bolt
    GM3256102Courtesy of GENERAL MOTORS COMPANY
  7. Clean the front wheel speed sensor area on the wheel hub and bearing assembly of any accumulated dirt and debris.
  8. Remove the front wheel speed sensor bolt (1).
  9. Remove the front wheel speed sensor assembly from the wheel hub and bearing assembly by pulling straight out.
About FixVault