FixVault
Home › Chevrolet › 2015 › Tahoe SSV › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Rear Wheel Speed Sensor Replacement › Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

    Fig 1: Rear Wheel Speed Sensor Harness Retainer
    GM3632920Courtesy of GENERAL MOTORS COMPANY
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (6-Lug Wheel) .
  3. Disconnect the rear wheel speed sensor electrical connector and release the retainers (1) from the frame rail.
    4. Fig 2: Rear Wheel Speed Sensor Harness Retainer
    GM3632924Courtesy of GENERAL MOTORS COMPANY
  4. Release the rear wheel speed sensor harness retainer (1) from the rear axle.
    5. Fig 3: Rear Wheel Speed Sensor Bolt
    GM3632926Courtesy of GENERAL MOTORS COMPANY
  5. Clean the rear wheel speed sensor area on the rear axle of any accumulated dirt and debris.
  6. Remove the rear wheel speed sensor bolt (1).
  7. Remove the rear wheel speed sensor assembly from the rear axle by pulling straight out.
About FixVault