FixVault
Home › Chevrolet › 2016 › Camaro SS, 2D Convertible, Automatic Trans › Repair and Diagnosis › Brakes › Parking Brake System › Repair Instructions › Electronic Parking Brake Control Module Replacement › Removal Procedure

Removal Procedure

  1. Block the drive wheels.
  2. Disable the parking brake cable adjuster. Parking Brake Cable Adjuster Disabling 
  3. Place the ignition in the OFF position.
  4. Raise and support the vehicle. Lifting and Jacking the Vehicle (Base)Lifting and Jacking the Vehicle (HP)
  5. Remove Exhaust Muffler - Exhaust Muffler Replacement (LGX, Coupe)Exhaust Muffler Replacement (LGX, Convertible)Exhaust Muffler Replacement (LT1, Coupe)Exhaust Muffler Replacement (LT1, Convertible)Exhaust Muffler Replacement (LTG, Coupe)Exhaust Muffler Replacement (LTG, Convertible)
    6. Fig 1: Electronic Parking Brake Control Module Bolts
    GM2833696Courtesy of GENERAL MOTORS COMPANY
  6. Remove the electronic parking brake control module bolts (1).
  7. Position the electronic parking brake control module to access the electrical connector.
  8. Disconnect the electronic parking brake control module electrical connector.
    9. Fig 2: Parking Brake Intermediate Cable Nut
    GM2833700Courtesy of GENERAL MOTORS COMPANY
  9. Disconnect the parking brake intermediate cable nut (1).
    10. Fig 3: Electronic Parking Brake Control Module Bracket Bolts
    GM3105162Courtesy of GENERAL MOTORS COMPANY
  10. Remove the electronic parking brake control module bracket bolts (1).
  11. Separate the electronic parking brake control module from the bracket.
    12. Fig 4: Electronic Parking Brake Control Module
    GM2833704Courtesy of GENERAL MOTORS COMPANY
  12. Maneuver and remove the electronic parking brake control module (1).
About FixVault