FixVault
Home › Chevrolet › 2016 › Camaro SS, 2D Convertible, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 105 (Disc Brake System) › Repair Instructions › Front Brake Shield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Brake Shield
    GM2202090Courtesy of GENERAL MOTORS COMPANY
  1. Install the front brake shield (1).
    2. Fig 2: Front Brake Shield Bolts
    GM2202088Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the front brake shield bolts (1) and tighten to 9 N.m (80 lb in).
    3. Fig 3: Disc Brake Rotor
    GM2202087Courtesy of GENERAL MOTORS COMPANY
  3. Install the front disc brake rotor (1). Refer to Front Brake Rotor Replacement (JL9 with LFX) Front Brake Rotor Replacement (JL9 with LS3, L99) Front Brake Rotor Replacement (J56) Front Brake Rotor Replacement (J57) .
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (Without RT2)Tire and Wheel Removal and Installation (With RT2) .
About FixVault