FixVault
Home › Chevrolet › 2016 › Camaro SS, 2D Convertible, Standard Trans › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Electronic Brake Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: Electronic Brake Control Module
    GM4161878Courtesy of GENERAL MOTORS COMPANY
  1. Install Electronic Brake Control Module (1)
    2. Fig 2: Electronic Brake Control Module Bolt
    GM4161877Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  2. Install Electronic Brake Control Module Bolt (1) (Qty: 4) and tighten to 3 N.m (27 lb in)
  3. Connect the EBCM electrical connector.
  4. Install Windshield Washer Solvent Container Filler Tube Replacement
  5. Program the EBCM. Electronic Brake Control Module Programming and Setup
About FixVault