Replace and Program Control Module or Reprogram Control Module

WARNING: This page is about a different car, the 2015 Chevrolet Caprice. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing control module, perform the following procedure:

Install EL-49642 SPS programming support tool.
Ignition ON.
Access the Service Programming System (SPS) and follow the on-screen instructions.
On the SPS Supported Controllers screen, select K43 Power Steering Control Module - Programming and follow the on-screen instructions.
On the SPS Supported Controllers screen, select K43 Power Steering Control Module - Configuration & Setup and follow the on-screen instructions.
With a scan tool, Clear All DTCs.