Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Wheel Stud | |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Rear Shock Absorber Bottom Bolt | 160 N.m (118 lb ft) |
| Rear Shock Absorber Upper Bracket Bolt | 115 N.m (85 lb ft) |
| Rear Spring Front Nut | 240 N.m (177 lb ft) |
| Rear Spring Shackle Bolt | 160 N.m (118 lb ft) |
| Rear Spring Shackle Nut | 160 N.m (118 lb ft) |
| Rear Spring U-Bolt Nut | |
| First Pass: | 80 N.m (59 lb ft) |
| Final Pass: | 125-135 degrees |