Installation Procedure

Install the fuel tank fuel feed pipe (4) to the fuel tank bracket (5) and the fuel pressure sensor clip (3).

Fig 1: Electrical Connector And Fuel Pressure Sensor Clip
Courtesy of GENERAL MOTORS COMPANY
Connect the electrical connector. (2)
Remove the EN-6015 plugs from all connections.
Connect the fuel tank fuel feed pipe (4) to the fuel tank fuel pump module (1). Refer to Plastic Collar Quick Connect Fitting Service .
Install the fuel tank. (1) Fuel Tank Replacement

Fig 2: Suitable Jack, Fuel Tank Straps And Bolts
Courtesy of GENERAL MOTORS COMPANY
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection