Fastener Specifications

Application	Specification
Application	Metric	English
Drivetrain and Front Suspension Cradle Front Bolt (1)
First Pass:	100 N.m	74 lb ft
Final Pass:	90 - 105 Degrees
Drivetrain and Front Suspension Cradle Rear Bolt (1)
First Pass:	100 N.m	74 lb ft
Final Pass:	90 - 105 Degrees
Electric Belt Drive Rack and Pinion Steering Gear Nut 1
First Pass:	55 N.m	41 lb ft
Final Pass:	150 - 165 Degrees
Exhaust Muffler Insulator Nut	22 N.m	41 lb ft
Front Compartment Insulator Bolt "lb in" spec shown	2.5 N.m	22 lb in
Front Compartment Splash Shield Bolt	2.5 N.m	22 lb in
Front Tire Front Air Deflector Fastener	2.5 N.m	22 lb in
Front Wheelhouse Liner Bolt	2.5 N.m	22 lb in
Lower Control Arm Bolt 1
First Pass:	100 N.m	74 lb ft
Final Pass:	30 - 45 Degrees
Lower Control Arm Nut 1
First Pass:	100 N.m	74 lb ft
Final Pass:	90 - 105 Degrees
Rear Tire Front Air Deflector Fastener	2.5 N.m	22 lb in
Rear Wheelhouse Liner Bolt	2.5 N.m	22 lb in
Rear Wheelhouse Liner Nut	2.5 N.m	22 lb in
Stabilizer Shaft Bolt 1
First Pass:	22 N.m	16 lb ft
Final Pass:	30 - 45 Degrees
Stabilizer Shaft Link Nut	65 N.m	48 lb ft
Steering Knuckle Nut (1)
First Pass:	35 N.m	26 lb ft
Final Pass:	30 - 45 Degrees
Steering Linkage Outer Tie Rod Nut (1)
First Pass:	35 N.m	26 lb ft
Final Pass:	30 - 45 Degrees
Transmission Mount Strut Bolt (1)
First Pass:	100 N.m	74 lb ft
Final Pass:	120 - 135 Degrees
Transmission Mount Strut Bolt to Transmission Rear Mount 1
First Pass:	100 N.m	74 lb ft
Final Pass:	120 - 135 Degrees
Underbody Rear Air Deflector Bolt	2.5 N.m	22 lb in
Underbody Rear Air Deflector Nut	2.5 N.m	22 lb in
1 = Use NEW fastener.