FixVault
Home › Chevrolet › 2016 › Cruze LS, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions › Repair Instructions › Fuel Pump Power Control Module Replacement › Removal Procedure

Removal Procedure

  1. Rear Compartment Floor Panel Trim» Remove
  2. Battery Negative Cable Disconnection and Connection » Disconnect the battery negative cable.
  3. Disconnect the electrical connector. (2)
    Fig 1: Electrical Connector
    GM4091547Courtesy of GENERAL MOTORS COMPANY
  4. Clip out the fuel pump power control module (1) from the bracket (3).
About FixVault