FixVault
Home › Chevrolet › 2016 › Cruze LS, Automatic Trans › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Turn Signal Switch Bracket Replacement › Installation Procedure

Installation Procedure

  1. Turn Signal Switch Bracket (1) @ Steering Column (2)» Install - Install until the tabs snap in
    Fig 1: Turn Signal Switch Bracket And Steering Column
    GM3701748Courtesy of GENERAL MOTORS COMPANY
  2. Bolt (2) @ Turn Signal Switch Bracket (1)» Install and tighten [2x] 2.35 N.m (21 lb in)
    Fig 2: Turn Signal Switch Bracket Bolts
    GM3701747Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Fastener Caution
  3. Theft Deterrent Module (1)» Install
    Fig 3: Theft Deterrent Module Bolts
    GM3701746Courtesy of GENERAL MOTORS COMPANY
  4. Bolt (2)» Install and tighten [2x] 0.8 N.m (7 lb in)
  5. Windshield Wiper and Washer Switch Replacement » Install
  6. Turn Signal Switch Replacement » Install
  7. Steering Wheel Airbag Coil Replacement » Install
  8. Steering Column Lower Trim Cover Replacement » Install
  9. Steering Column Upper Trim Cover Replacement » Install
  10. Steering Wheel Replacement » Install
About FixVault