Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Apply structural adhesive epoxy, (1) Lord Fusor™ 127EZ or equivalent, to fascia at mating surface according to manufacturer's directions.
Courtesy of GENERAL MOTORS COMPANY
- Using the alignment tabs/outline, install the sensor bracket (1) to the fascia.
- Allow adhesive to cure according to manufacturer's directions.
Courtesy of GENERAL MOTORS COMPANY
- Install the sensor (1) to the sensor bracket.
- Attach the wiring harness and connect the electrical connectors as necessary.
- Front Bumper Fascia»Install Front Bumper Fascia Replacement
.