FixVault
Home › Chevrolet › 2016 › Malibu Limited LS › Repair and Diagnosis › General Information › Reset Procedures › Programming And Setup - All Systems › Repair Instructions › Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6T30/6T40/6T45/6T50) › TCM Reprogramming

TCM Reprogramming

  1. If the TCM needs to be reprogrammed. Refer to Service Programming System (SPS) .
    NOTE:
    • Use a scan tool to view and record the Transmission Control Module - End Model Part Number in the original TCM prior to starting the TCM reprogramming procedure.
    • In some cases, the TCM and ECM may have to be reprogrammed. When a selection for TCM Transmission Control Module - Programming is not available, select SEQ Programming Sequence ECM/TCM (Automatic Transmission Only).
  2. Perform the Transmission Adaptive Values Learn. Refer to Transmission Adaptive Values Learn .
  3. Turn the ignition OFF for 30 seconds.
    NOTE: After programming, perform the following to avoid future misdiagnosis:
  4. Turn the ignition ON with the engine OFF.
  5. Use the scan tool in order to retrieve history DTCs from all modules.
  6. Clear all history DTCs.
About FixVault