FixVault
Home › Chevrolet › 2016 › SS Automatic Trans › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System And Pedestrian Protection System › Repair Instructions › Advance Parking Assist Alarm Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  1. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Disconnect electrical from the front object alarm sensor.
  3. Lift the locking tabs on the housing and remove the front object alarm sensor.
About FixVault