FixVault

Installation Procedure

    Fig 1: Side Instrument Panel Upper Trim Panel & Mounting Bolts
    GM3402825Courtesy of GENERAL MOTORS COMPANY
  1. Install the right side instrument panel upper trim panel (2). Refer to Instrument Panel Upper Trim Panel Replacement - Right Side .
  2. Fig 2: Instrument Panel Assembly
    GM3512773Courtesy of GENERAL MOTORS COMPANY
  3. When replacing the instrument panel assembly apply tape to the steering column adjustment lever and the surrounding areas to prevent marring.
  4. With the aid of an assistant, position the instrument panel assembly (1) over the steering column, over the gear shifter and into the vehicle.
  5. Ensure the sun load sensor wiring and centre speaker wiring (if equipped) is pulled through the access hole.
  6. Reposition and secure the instrument panel wiring harness into vehicle position at the indicated points.
  7. Ensure the accessory power receptacle/cigar lighter wiring is reconnected.
  8. Ensure all instrument panel dowels (side and centre) are relocated and locked in.
  9. Fig 3: Sun Load Temperature & Headlamp Automatic Control Ambient Light Sensor Bezel
    GM3402872Courtesy of GENERAL MOTORS COMPANY
  10. Install the sun load sensor (1). Refer to Sun Load Temperature and Headlamp Automatic Control Ambient Light Sensor Bezel Replacement .
  11. Fig 4: Instrument Panel Assembly & Airbag Inflatable Fasteners
    GM3512772Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  12. Install the instrument panel assembly fasteners (1) and tighten to 2.5 N.m (22 lb in).
  13. Install the instrument panel inflatable restraint module airbag inflatable fasteners (2) and tighten to 9 N.m (80 lb in).
  14. Connect the upper right duct air temperature sensor connector.
  15. Install the electrical connector to the instrument panel inflatable restraint module airbag inflatable.
  16. Fig 5: Instrument Panel Assembly Fasteners
    GM3512771Courtesy of GENERAL MOTORS COMPANY
  17. Install the instrument panel assembly bolts (1) and screw (2) and tighten to 2.5 N.m (22 lb in).
  18. Install the right side window defogger outlet duct.
  19. Fig 6: Selector Lever Housing
    GM1954236Courtesy of GENERAL MOTORS COMPANY
  20. Install the selector lever housing (2) from the base (1) ensuring the four retaining tabs are engaged (3). Reconnect any connectors.
  21. Fig 7: Shift Knob Trim Plate & Boot Assembly
    GM2964476Courtesy of GENERAL MOTORS COMPANY
  22. Install the automatic transmission control lever knob (1). Refer to Transmission Control Lever Knob Replacement .
  23. Fig 8: Instrument Panel Assembly Fasteners
    GM3512770Courtesy of GENERAL MOTORS COMPANY
  24. Install the instrument panel assembly fasteners (1) and tighten to 2 N.m (18 lb in).
  25. NOTE:

    These screws are longer than all other instrument panel assembly fasteners.

  26. Install the instrument panel outer air outlet duct retainer.
  27. Fig 9: Instrument Panel Assembly Fasteners
    GM3512768Courtesy of GENERAL MOTORS COMPANY
  28. Install the instrument panel assembly fasteners (1) and tighten to 2.5 N.m (22 lb in).
  29. Connect the data link connector.
  30. Fig 10: Instrument Panel Assembly Fasteners
    GM3512767Courtesy of GENERAL MOTORS COMPANY
  31. Install the instrument panel assembly bolts (1) and screw (2) and tighten to 2.5 N.m (22 lb in).
  32. Install the left side window defogger outlet duct.
  33. Fig 11: Right Front Floor Air Outlet Duct & Mounting Components
    GM3417760Courtesy of GENERAL MOTORS COMPANY
  34. Install the right front floor air outlet duct (3) and reconnect the lower right duct air temperature sensor wiring. Refer to Floor Front Air Outlet Duct Replacement - Right Side .
  35. Fig 12: Head-Up Display Bezel
    GM3530736Courtesy of GENERAL MOTORS COMPANY
  36. Install the head-up display bezel (1). Refer to Head-Up Display Bezel Replacement 
  37. Fig 13: Instrument Cluster Assembly
    GM3402863Courtesy of GENERAL MOTORS COMPANY
  38. Install the instrument cluster (2) complete with the steering column upper trim cover and fabric closeout attached. Take caution to ensure the fabric closeout base plate pegs are engaged correctly. Refer to Instrument Cluster Replacement .
  39. Fig 14: Radio Front Center Speaker & Fasteners
    GM3559713Courtesy of GENERAL MOTORS COMPANY
  40. Install the radio front center speaker (2). Refer to Radio Front Center Speaker Replacement .
  41. Fig 15: Radio & Fasteners
    GM3559709Courtesy of GENERAL MOTORS COMPANY
  42. Install the radio (2). Refer to Radio Replacement .
  43. Fig 16: Instrument Panel Ignition Lock Key Transmitter Antenna
    GM3559733Courtesy of GENERAL MOTORS COMPANY
  44. Install the instrument panel ignition lock key transmitter antenna (1). Refer to Ignition Lock Key Transmitter Antenna Replacement - Instrument Panel .
  45. Fig 17: Driver Side Instrument Panel Lower Airbag
    GM3582144Courtesy of GENERAL MOTORS COMPANY
  46. Install the driver side instrument panel lower airbag (2). Refer to Instrument Panel Lower Airbag Replacement - Driver Side .
  47. Fig 18: Floor Front Air Outlet Duct & Fasteners - Left Side
    GM3417424Courtesy of GENERAL MOTORS COMPANY
  48. Install the left front floor air outlet duct (2) and reconnect the lower left duct air temperature sensor wiring. Refer to Floor Front Air Outlet Duct Replacement - Left Side .
  49. Fig 19: Instrument Panel Outer Trim Covers
    GM3402826Courtesy of GENERAL MOTORS COMPANY
  50. Install the left and right instrument panel outer trim cover (1). Refer to Instrument Panel Outer Trim Cover Replacement 
  51. Fig 20: Windshield Garnish Molding Assembly
    GM3586050Courtesy of GENERAL MOTORS COMPANY
  52. Install the windshield garnish moldings (1). Refer to Windshield Garnish Molding Replacement .
  53. Fig 21: Front Floor Console Extension Panel - Right Side
    GM3533138Courtesy of GENERAL MOTORS COMPANY
  54. Install the right front floor console extension panel (1). Refer to Front Floor Console Extension Panel Replacement - Right Side 
  55. Fig 22: Front Floor Console Extension Panel - Left Side
    GM3533140Courtesy of GENERAL MOTORS COMPANY
  56. Install the left front floor console extension panel (1). Refer to Front Floor Console Extension Panel Replacement - Left Side 
  57. Fig 23: Front Floor Console
    GM3232500Courtesy of GENERAL MOTORS COMPANY
  58. Install the front floor console (1). Refer to Front Floor Console Replacement (Automatic) Front Floor Console Replacement (Manual) .
  59. Fig 24: Turn Signal Switch Bracket
    GM3414291Courtesy of GENERAL MOTORS COMPANY
  60. Install the turn signal switch bracket (1). Refer to Turn Signal Switch Bracket Replacement .
  61. Enable the SIR System. Refer to SIR Disabling and Enabling .