Fastener Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Rear Drive Shaft to Rear Hub Retaining Nut | ||
| There are two alternate methods of achieving the required Rear Hub Retaining Nut torque.
IMPORTANT:
DO NOT EXCEED THE SPECIFIED TIGHTENING VALUES, otherwise premature bearing failure may result. |
||
| Preferred Method | ||
|
350 N.m | 258 lb ft |
|
Loosen 180 degrees | |
|
370 N.m | 273 lb ft |
| Alternate Method | ||
|
190 N.m | 140 lb ft |
|
Loosen 180 degrees | |
|
120 N.m | 89 lb ft |
|
60 Degrees | |