FixVault
Home › Chevrolet › 2016 › Spark EV › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Brake Pressure Modulator Valve Bracket Replacement › Installation Procedure

Installation Procedure

    Fig 1: Brake Pressure Modulator Valve Bracket
    GM3266917Courtesy of GENERAL MOTORS COMPANY
  1. Install the brake pressure modulator valve bracket (1).
    2. Fig 2: Brake Pressure Modulator Valve Bracket Bolts
    GM3266916Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  2. Install the brake pressure modulator valve bracket bolts (1) and tighten to 3 N.m (27 lb in).
  3. Install the electronic brake and traction control module bracket. Refer to Electronic Brake and Traction Control Module Bracket Replacement .
About FixVault