FixVault
Home › Chevrolet › 2016 › Spark EV › Repair and Diagnosis › General Information › Reset Procedures › Programming And Setup - All Systems › Repair Instructions › K20 Engine Control Module: Programming and Setup › Replace and Program ECM or Reprogram ECM

Replace and Program ECM or Reprogram ECM

To program a replacement or an existing ECM, perform the following procedure:

  1. Install EL-49642  SPS programming support tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select ECM Programming and follow the on-screen instructions.
About FixVault