FixVault
Home › Chevrolet › 2016 › Spark LS, Automatic CVT Trans › Repair and Diagnosis › External Pages › Different car › Section 53 (Lighting System) › Repair Instructions › Brake Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower reinforcement bracket. Refer to Instrument Panel Lower Reinforcement Bracket Replacement .
  2. Remove the intermediate steering shaft (1). Refer to Intermediate Steering Shaft Replacement .
    Fig 1: Intermediate Steering Shaft
    GM3239974Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the brake pedal position sensor electrical connector.
  4. Remove the brake pedal position sensor bracket bolts (1).
    Fig 2: Brake Pedal Position Sensor Bracket Bolts
    GM3349689Courtesy of GENERAL MOTORS COMPANY
  5. Remove the brake pedal position sensor and bracket assembly.
  6. Remove the brake pedal position sensor bolt (1).
    Fig 3: Brake Pedal Position Sensor Bolt
    GM3349690Courtesy of GENERAL MOTORS COMPANY
  7. Remove the brake pedal position sensor (2) from the bracket.
About FixVault