FixVault
Home › Chevrolet › 2016 › Spark LS, Standard Trans › Repair and Diagnosis › External Pages › Different car › Section 55 (Engine Cooling System) › Repair Instructions › Radiator Support Bracket Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 2 radiator support bracket (2).
    Fig 1: Radiator Support Bracket Bolts
    GM2753102Courtesy of GENERAL MOTORS COMPANY
  2. Install the 2 radiator support bracket bolts (1) and tighten to 22 N.m (16 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Install the upper opening cover (2) and 4 upper opening cover retainers (1).
    Fig 2: Upper Air Guard Retainers
    GM2753095Courtesy of GENERAL MOTORS COMPANY
  4. Install the left side opening cover (4) and 4 left side opening cover retainers (3).
    Fig 3: Front Side Air Baffle Retainers
    GM2753094Courtesy of GENERAL MOTORS COMPANY
  5. Install the right side opening cover (2) and 3 right side opening cover retainers (1).
  6. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .
About FixVault